GM Cast Iron PowerGlide transmission

Cast Iron Powerglide Parts for Sale

Parts to be shipped from Belleville, MI AFTER received from supplier(s) (which can take a week or more)

ATTENTION International Customers

I will no longer ship parts Internationally via the Postal Service. I have had WAY to many problems with VERY long delivery times. If you want parts shipped to International addresses you must fill out the International Shipping Cost Request form so I can quote FedEx or DHL rates INSTEAD of clicking on "Add to Cart".

I can get 100's of additional parts for these transmissions that I don't yet have listed. E-mail me with a list of other parts you may need for these. If I have them I will list them for you.

I will combine shipping if you order more than one item.
PayPal will add each item's shipping charges, but I will refund excess shipping charges based on how I can combine items to minimize shipping costs. Sturdiness of parts as well as size and weight may impact how parts can be combined, but I will try to get the costs as low as practical for you.

Currently shipments can take MUCH longer than normal due to delays within the shipping carriers networks.

Click on category below to jump to that section of this page
Overhaul/Rebuild Kits
Bands
Filters
Bushings
Miscellaneous Gaskets and Seals
Washers and Bearings
Vacuum Modulator
Pumps and Related Parts
Valve Bodies
Drums/Cylinders
Gears
Extension Housings
Other Hard Parts
Manuals
Overhaul/Rebuild Kits
For International Shipping Rates click here

New 1950-52 Cast Iron Powerglide Overhaul Kit (1) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (488.00+22.05 shipping and handling)

New 1953-54 Cast Iron Powerglide Overhaul Kit (except Corvette) (1) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (396.00+22.05 shipping and handling)

New 1953-54 Cast Iron Powerglide Overhaul Kit (Corvette only) (1) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (396.00+22.05 shipping and handling)

New 1955-57 Cast Iron Powerglide Overhaul Kit (1) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (336.00+22.05 shipping and handling)

New 1958-62 Cast Iron Powerglide Overhaul Kit (1) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (264.00+22.05 shipping and handling)

New 1950-52 Cast Iron Powerglide Master Rebuild Kit (with lug style friction plates) (2) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (788.00+22.05 shipping and handling)

New 1953-54 Cast Iron Powerglide Master Rebuild Kit (except Corvette) (2) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (665.00+22.05 shipping and handling)

New 1953-54 Cast Iron Powerglide Master Rebuild Kit (Corvette only) (2) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (724.00+22.05 shipping and handling)

New 1955-57 Cast Iron Powerglide Master Rebuild Kit (2) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (744.00+22.05 shipping and handling)

New 1958-62 Cast Iron Powerglide Master Rebuild Kit (2) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (564.00+22.05 shipping and handling)

Return to top of page
Bands
For International Shipping Rates click here

R&R ONLY Relined CI Powerglide Front Band (1950-54 Single Wrap) and 1953-55 Corvette 6 cylinder with Spring (H8) (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (240.00+22.05 shipping and handling)

R&R ONLY Relined CI Powerglide 1955-62 Front Band (Double Wrap) (H8) (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (240.00+22.05 shipping and handling)

R&R ONLY Relined CI Powerglide Rear Band (1950-62 Single Wrap) without Spring (H8) (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (240.00+22.05 shipping and handling)

Return to top of page
Filters
For International Shipping Rates click here

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Filter (1955-57) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Filter (1958-62) (will fit 1955-57, but looks a bit different) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Bushings
For Internatio1hipping Rates click here

(Click to see Special Notice on this Part) New 1953-63 Cast Iron Powerglide Front Pump Bushing sent to anywhere in the lower 48 U.S.A. states via US Postal Mail
(Click to see Special Notice on this Part) New 1958-62 Cast Iron Powerglide input shaft bushing (splined) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

1950-57 CI Powerglide Hi/Lo Clutch Drum Bushing (B5) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (85.00 + 9.65 shipping and handling)

(Click to see Special Notice on this Part) New 1958-62 Cast Iron Powerglide sun gear bushing (splined) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) New Cast Iron Powerglide Bushing Set (converter bushing, drum bushing, and case bushing) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) New Cast Iron Powerglide Case Bushing sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) New 1958-62 Cast Iron Powerglide "Top Hat" Bushing sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Miscellaneous Gaskets and Seals
For International Shipping Rates click here

(Click to see Special Notice on this Part) CI Powerglide Front Pump Metal Clad Seal sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) CI Powerglide Throttle Valve Lever Shaft Seal and Throttle Valve Lever Gasket Set sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) 1950-52 CI Powerglide Torque Converter Cover O-Ring (G1) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

1953-58 CI Powerglide Torque Converter Cover Lathe Cut (square) Rubber Seal (G1) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (85.00 + 9.65 shipping and handling)

(Click to see Special Notice on this Part) 1950-52 CI Powerglide Bell Housing to Case (Valve Body) Gasket (G10) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) 1953-55 CI Powerglide Bell Housing to Case (Valve Body) Gasket (6 Cylinder) (G10) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) 1955E CI Powerglide Bell Housing to Case (Valve Body) Gasket (without by-pass hole) (8 Cylinder) (G10) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

1955L-57 CI Powerglide Bell Housing to Case (Valve Body) Gasket (with by-pass hole) (G10) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (85.00 + 9.65 shipping and handling)

(Click to see Special Notice on this Part) 1958 CI Powerglide Bell Housing to Case (Valve Body) Gasket (G10) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) 1959-62 CI Powerglide Bell Housing to Case (Valve Body) Gasket) (G10) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) CIPG Gaskets and Cork Seals for installing Torque Ball sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Washers and Bearings
For International Shipping Rates click here

1956-60 CI Powerglide Hi/Lo Clutch Hub Thrust Washer (W11) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (57.00 + 15.40 shipping and handling)

1957-62 CI Powerglide V/B to Clutch Drum Thrust Washer 0.061" Thick (W12) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (52.00 + 15.40 shipping and handling)

1957-62 CI Powerglide V/B to Clutch Drum Thrust Washer 0.078" Thick (W12) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (52.00 + 15.40 shipping and handling)

1957-62 CI Powerglide V/B to Clutch Drum Thrust Washer 0.106" Thick (W12) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (52.00 + 15.40 shipping and handling)

1950-62 CI Powerglide Input Sun Gear Thrust Washer sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (47.50 + 15.40 shipping and handling)

(Click to see Special Notice on this Part) New 1958-62 Cast Iron Powerglide sun gear washer (flanged) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used 1955-up Cast Iron Powerglide Output Shaft Washer (W14) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used 1958-up Cast Iron Powerglide Planetary Splined Washer sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Vacuum Modulator
For International Shipping Rates click here

New 1958-62 Cast Iron Powerglide Vacuum Modulator sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (175.00+22.05 shipping and handling)

Used Cast Iron Powerglide Vacuum Modulator Pin sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (54.00+15.40 shipping and handling)

Cast Iron Powerglide Modulator Valve Clip sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (15.00+9.65 shipping and handling)

Return to top of page
Pumps and Related Parts
For International Shipping Rates click here

R&R ONLY Used 1950-52 Cast Iron Powerglide Front Pump with Stator Support (4) (5) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (690.00+22.05 shipping and handling)

R&R ONLY Used 1953-57 Cast Iron Powerglide Gear Type Front Pump with Stator Support (4) (5) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (790.00+22.05 shipping and handling)

R&R ONLY Used 1958-62 V8 Cast Iron Powerglide Gear Type Front Pump with Stator Support (4) (5) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (495.00+22.05 shipping and handling)

R&R ONLY Used 1950-52 Cast Iron Powerglide Front Pump without Stator Support (4) (6) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (475.00+22.05 shipping and handling)

R&R ONLY Used 1953-62 Cast Iron Powerglide Gear Type Front Pump without Stator Support (4) (6) (8) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (350.00+22.05 shipping and handling)

(Click to see Special Notice on this Part) R&R ONLY Used V8 Cast Iron Powerglide Rear Pump (3) (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) R&R ONLY Cast Iron Powerglide Rear Pump Drive Gear (6 cylinder transmission only) (4) (9) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) R&R ONLY Cast Iron Powerglide Rear Pump Drive Gear (V-8 transmission) (4) (9) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Valve Bodies
For International Shipping Rates click here

(Click to see Special Notice on this Part) Repair your Cast Iron Powerglide Valve Body (repair shaft bore wear) (7) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Repair your Cast Iron Powerglide Valve Body (repair shaft bore wear and drum bushing support area) (7) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Cast Iron Powerglide Manual Control Valve sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (140.00+15.40 shipping and handling)

NOS Cast Iron Powerglide Vacuum Valve Stop Retainer sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (45.00+9.65 shipping and handling)

R&R ONLY 1953-54 CI Powerglide Pressure Regulator Valve (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (450.00+15.40 shipping and handling)

Return to top of page
Drums/Cylinders
For International Shipping Rates click here
(Click to see Special Notice on this Part) Used 1953-57 Cast Iron Powerglide high clutch drum (with a smooth area around the piston spring retainer) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail
R&R ONLY Used 1958-62 Cast Iron Powerglide Clutch Drum (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (475.00+22.05 shipping and handling)

Return to top of page
Gears
For International Shipping Rates click here

New 1955-1957 Cast Iron Powerglide Speedometer Housing (10) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (170.00+15.40 shipping and handling)

New 1957 Cast Iron Powerglide 21 Tooth Driven Gear sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (75.00+15.40 shipping and handling)

New 1955-1957 Cast Iron Powerglide Speedometer Housing and 21 Tooth Driven Gear (11) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (196.00+15.40 shipping and handling)

New 1955-1962 Cast Iron Powerglide Governor Gear sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (70.00+15.40 shipping and handling)

Used 1950-62 Cast Iron Powerglide Planetary Ring Gear (H11) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (296.00+22.05 shipping and handling)

Used 1950-62 Cast Iron Powerglide Sun Gear and Flange (H6) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (165.00+22.05 shipping and handling)

(Click to see Special Notice on this Part) R&R ONLY Used 1951-52 Cast Iron Powerglide Planetary Assembly with 6" Output Shaft (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

R&R ONLY Used 1953-54 Cast Iron Powerglide Planetary Assembly with 6" Output Shaft (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (650.00+27.45 shipping and handling)

R&R ONLY Used 1955-57 Cast Iron Powerglide Planetary Assembly with 14-1/2" Output Shaft (except Corvette) (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (650.00+27.45 shipping and handling)

R&R ONLY Used 1955-62 Cast Iron Powerglide Planetary Assembly with 14-1/2" Output Shaft (Corvette only) (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (650.00+27.45 shipping and handling)

Used 1955-57 Cast Iron Powerglide Planetary Assembly with 14-1/2" Output Shaft (except Corvette) sent to Australia via DHL® (750.00+27.45 shipping and handling)

Used 1955-62 Cast Iron Powerglide Planetary Assembly with 14-1/2" Output Shaft (Corvette only) sent to Australia via DHL® (750.00+27.45 shipping and handling)

(Click to see Special Notice on this Part) R&R ONLY Used 1958-62 Cast Iron Powerglide Planetary Assembly with 12-1/4" Output Shaft (except Corvette) (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Extension Housings
For International Shipping Rates click here

(Click to see Special Notice on this Part) Used 1956 Cast Iron Powerglide Extension Housing (7½" long overall) (NOT the style for floor shift application) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Other Hard Parts
For International Shipping Rates click here

Cast Iron Powerglide Servo Cover Locating Sleeve sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (84.00+15.40 shipping and handling)

(Click to see Special Notice on this Part) 1950-52 Cast Iron Powerglide Torque Converter Front Cover sent to anywhere in the lower 48 U.S.A. states via Ground Transportation Click to get a shipping quote.
(Click to see Special Notice on this Part) 1953-62 Cast Iron Powerglide Torque Converter Front Cover Corvette (six holes for flywheel mount) sent to anywhere in the lower 48 U.S.A. states via Ground Transportation Click to get a shipping quote.
(Click to see Special Notice on this Part) 1953-62 Cast Iron Powerglide Torque Converter Front Cover (three round holes for flywheel mount) sent to anywhere in the lower 48 U.S.A. states via Ground Transportation Click to get a shipping quote.
(Click to see Special Notice on this Part) 1953-62 Cast Iron Powerglide Torque Converter Front Cover (three square holes for flywheel mount) sent to anywhere in the lower 48 U.S.A. states via Ground Transportation Click to get a shipping quote.
New 1955-62 Cast Iron Powerglide Flex Plate (Flywheel) for a 235CID Six Cylinder Engine Click (3) to see applications sent to anywhere in the lower 48 U.S.A. states via US Postal Mail (375.00+27.45 shipping and handling)

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Oil Drain Plug (on bottom rear of bell housing) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Reverse Band Swivel Bracket sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Reverse Band Servo Piston sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Reverse Band Anchor sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Kick-down Shaft (come from the Throttle Valve) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Front Servo Piston sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Low Servo Return Spring sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Input Shaft sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) R&R ONLY Used 1953 Chevy Cast Iron Powerglide Manual Valve (4) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used 1957 Chevy Cast Iron Powerglide Flexplate for 235 CI 6 cyl (6 mounting holes plus 3 alignment stud holes 14 1/16 OD) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Chevy Cast Iron Powerglide 3/8 x 24 Torque Converter Nut to attach cover to flywheel (type that fits into a slot in the cover) sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Case Cup sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Torque Ball Cover sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

(Click to see Special Notice on this Part) Used Cast Iron Powerglide Torque Ball sent to anywhere in the lower 48 U.S.A. states via US Postal Mail

Return to top of page
Manuals
For International Shipping Rates click here

Cast Iron PowerGlide Repair Manual (66 pages) on USB Drive sent to anywhere in the lower 48 USA states via US Postal Mail (35.00+9.65 shipping and handling)

Return to top of page
(1) Overhaul kit includes: gaskets, o'rings, lip seals, sealing rings (rotating ones only), and metal clad seals

(2) Master Rebuild kit includes: gaskets, o'rings, lip seals, sealing rings (rotating ones only), metal clad seals, steel (unlined) clutches, and friction (lined) clutches.

(3) Flywheel (3781966) 168 teeth x 2.500" center hole x 14.125" outside diameter. Application: 1955-1957 w/265 engine, 1957-1964 w/283 engine, 1963-1965 w/409 engine (It is necessary to use shorter (45/64" Overall Length) mounting bolt 3727207 with this flywheel on the 409 engine
(4) This is an R&R ONLY part, which means that a core must be shipped to and received by me before I can ship your part to you, due to extreme shortage of good cores. My address is: Charlie Tranny, 1043 Savage Rd., Belleville, MI 48111
(5) Front Pump with Stator Support includes pump body, gears, and pump cover (stator support)

(6) Front Pump without Stator Support includes pump body and gears, but NOT the pump cover (stator support)

(7) You ship your Valve Body to me. Then I ship it out for repair. When I get it back, I ship it back to you. My address is: Charlie Tranny, 1043 Savage Rd., Belleville, MI 48111

(8) Parts are listed for the year of the transmission (may be different from the vehicle year if transmission has been swapped)! Here is how to identify which "series" you have. 1950-52 has NO governor and a diaphragm modulator, 1953-54 HAS a governor and a diaphragm modulator, 1955-57 has a governor but NO modulator, and 1958-62 has a governor and a screw-in canister modulator.

(9) You must E-mail me to tell me the thickness of your gear to make sure I send you the proper thickness gear.

(10) New speedometer housing for Chevrolet Cast Iron Powerglide transmissions used from 1955-1957. These housings have been reproduced and include an internal metal clad seal which the original design housings did not include, which is why they develop leaks over time. The housing measures 2-5/8" overall length. Includes the external o-ring seal and the internal metal clad seal.
(11) New speedometer housing for Chevrolet Cast Iron Powerglide transmissions used from 1955-1957. These housings have been reproduced and include an internal metal clad seal which the original design housings did not include, which is why they develop leaks over time. The housing measures 2-5/8" overall length. Includes the external o-ring seal and the internal metal clad seal and a new red 21 tooth speedometer gear.
(Special Notice)

Due to severe disruption in the supply sources for this part, you must E-mail to me to find out about price and availability of this part. Make SURE that in your email you include 1. Name of the transmission, 2. The name of the part, 3. The year of the vehicle, 4. The model of the vehicle, 5. The engine size of the vehicle, 6. Your country, Your Postal (ZIP) Code, AND Phone Number.

(Ground Shipping Cost Request)

Since Ground Transportation prices have skyrocketed and are continually changing, I can no longer put those charges into my listings. You must fill out the form that you can access HERE. After filling it out, save it to your desktop. You can then attach it to the E-mail you send to me to find out the cost for ground transportation on heavy and/or bulky items. If you need instructions on how to save the file to your computer, click HERE. You will need Acrobat Reader to access the form. If you don't have it, you can download it for free HERE.

Home

Who is Charlie Tranny?

What transmission is it?

Order parts

Contact Charlie Tranny